6002 2RS/ZZ/OPEN Bearing

6002 2RS Bearings is a 60 series deep groove ball bearing produced by our company. RUWH is a famous brand of bearings in China, specializing in 6002 2RS/ZZ/OPEN bearings, size 15*32*9mm, precision according to customer requirements, material Gcr15, quality P6 Z3V3, P5 Z4V4. If you need to order, don't hesitate to contact us!

The 6002-2RS bearing 15x32x9 sealed ball bearing has deep groove geometry for high speeds and supporting both radial and axial loads. The bearing is made of chrome steel for durability and resistance to deformity under heavy loads, and it has rubber seals on both sides of the bearing to keep lubricant in and contaminants out. It comes pre-lubricated from the manufacturer so that no additional lubrication is required. This deep-groove sealed ball bearing is suitable for use in applications that involve combined radial and axial loads and a need for high running accuracy at high rotational speeds. Such applications include clutches, drives, gearboxes, compressors, pumps, turbines, and printing and textile machines, among others.

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

Single row deep groove ball bearing with two metal shields & C3 clearance 15mm inside x 32mm outside x 9mm width, also known as 6002ZZC3, 6002ZC3, 60022ZC3 6002ZRC3 60022ZRC3 6002ZZEC3

Single row deep groove ball bearings are used in a wide variety of applications, they are simple in design, non-separable, suitable for high speeds and are robust in operation, and need little maintenance. Deep raceway grooves and the close conformity between the raceway grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, in addition to radial loads.

Single row deep groove ball bearings are manufactured as open type (unsealed), sealed and shielded, the most popular sizes of deep groove ball bearings are also produced in sealed versions with shields or contact seals on one or both sides, the bearings with shields or seals on both sides are lubricated for life and are maintenance free. A sealed bearings seals has contact on the bearings inner and outer, a shielded bearings shield has contact on the outer only, and Shielded bearings are primarily intended for applications where the inner ring rotates. If the outer ring rotates, there is a risk that the grease will leak from the bearing at high speeds.

6002 2RS Bearing Dimensions

Inside diameter: 15mm

Outside diameter: 32mm

Width: 9mm

6002 2RS Bearings Basic Load Ratings

Dynamic: 5.85kn

Static: 2.85kn

6002 2RS Bearings Speed Ratings

Reference speed: 50000 r/min

Limiting speed: 26000 r/min

6002 2RS Deep groove ball bearing production flow chart

Ordering Instructions for 6002 2RS Deep Groove Ball Bearings

Ningbo Renhe Machinery Bearing Co., LTd is a China 6002 2RS bearing manufacturer, please save our email(pauline@ruwhbearing.com) or send us an inquiry!